We will change your engines oil and filter with factory approved parts. Check your tire pressure, and condition. Complete a multi-point inspection, top offf all fluids, and test drive your vehicle for proper vehicle performance. Synthetic oil is extra.

Remove all 4 tires, set correct tire pressure, rotate and balance all tires to factory specifications, check brake condition, lubricate and clean center hubs, test driver after service to verify. (road force balancing extra)

Check front and rear suspension items for unusual wear. Complete computerized thrust angle alignment. Set front and rear toe. Adjust front camber and caster where applicable.

Remove worn out lubricant from differential(s), add new gear oil and additive package to proper level. Road test vehicle for proper shifting after service.

One of our trained technicians using the proper tools will use A/C power foam to clean evaporator and evaporator box, flush system and remove debris from system and drain tube, adjust drive belts, and clean condenser.

Using “BG” clean up service, remove all deposits through-out intake system to correct fuel and air ration for proper engine performance.

The power steering pump produces high pressures between 800 and 2000 lbs, depending on the model and high heat. Heat + pressure = fluid breakdown. Fluid failure = steering pump or rack and pinion failure (or both).

Every: 5,000; 7,500; 22,500; 25,000; 35,000; 37,500; 42,500; 52,500; 55,000; 65,000; 67,500 Miles

Every: 10,000; 15,000; 20,000; 40,000; 45,000; 50,000; 70,000; 75,000; 80,000; 100,000; 110,000 Miles

Every: 30,000; 60,000; 90,000; 120,000; 150,000; 180,000; 210,000; 240,000; 280,000